January to April this year, China's machine tool imports dropped them on a quarter of all imports 11,12 compared with last year the month of decline has narrowed, but began to decline in April, the month in April fell by more than half of imports. Month in April, 4383 China's imports of machine tool units, dropped 51.9 percent year-on-year, worth 540 million U.S. dollars, down 20.1%.

Metal processing machine tools(such as duct machine,pipe machinery, elbow machine,tube machine and cnc plasma ) this year, China's imports is mainly due to sharp decline in domestic demand is insufficient. The world economic recession on the negative impact on China's economic development become increasingly prominent, especially in the global automotive industry such as steel and machine tool industry fell significantly downstream, resulting in the domestic market demand for machine tools dropped.

The short term, machine tool products will continue to lack of domestic demand. April 2009 metal-cutting machine tool production in China 55,200 units in March output growth than 01,100 units, year-on-year growth rate of -8.41%, slightly down; April CNC machine tool production in China of about 11,000 units, year-on-year growth rate fell sharply to -13.65%. A total of 1-4 months, the metal-cutting machine tools, metal forming machine tools production fell 20.2 percent and 20.5 percent, including metal-cutting CNC machine tools, CNC metal forming machine tools dropped by 18.7% and 8.3%, the machine tool industry is still in decline in the overall state of .

Machine tool industry is still in an adjustment period, machine tool product mix still is not quite rational, in the proportion of high-end products is still low, some high-end situation of dependence on imported machine tools has not yet been broken. Small and medium-sized enterprises are still facing difficulties in their operation, a serious decline in profit, low-end products, such as the plight of overcapacity. Machine tool industry in general business degrees to about half a year behind the economic cycle, so the industry is lagging behind the recovery to stabilize, we believe that the machine tool industry to mention the short term bottom, we still maintain its "neutral" rating.

Plasma Cutting Machine is easy to use which helps many companies save a lot of energy and people.

A computer in the cnc plasma used the image as a template to guide a plasma cutter as it cut the blade out of a sheet of industrial-grade steel. The system was so exact, it reproduced nicks and imperfections in the original sword.The system was so exact, it reproduced nicks and imperfections in the original sword.
The industrial computer control system utilizes a MISUBISHI servomotor system with industrial control software and a high clarity LCD.

SBPC-3100 cnc plasma cutter has American HUPERTHERM plasma unit.

The flange forming machine of SBKJ is characterized by its easy operation and maintenance and high efficiency, good seal ability,durability and solidity.
The flanging machine consists of a feeding frame, main forming machine and a shearing unit, which includes grinder and hydraulic shearing unit. The hydraulic shearing unit makes fixed cutting available with very little burr, which make it especially suitable for ventiduct production of large section.
It can be operated automatically with a maximum work speed of 6 m/min.

The flange machine is divided into four types: T-20?T-30?T-35?T-40 with their corresponding duct corner T-20DC?T-30DC and T-40DC.TDC flange making machine made by SBKJ may match and produce all the ducts in the DW144 standard, and has passed the HVAC PW/TMI(1987) pressure test.

TDC Flange and TDF Flanging machine:
Generally we will customize flange machines according to drawings or samples of different customers. Any requirements on shapes or configuration specs are available for our company to do.

From:http://sbkj.com

Compared to similar equipments in Switzerland,spiral duct machine of SBKJ has at least three advantages:

Advantage of 1: SBKJ is using the most advanced principles of the gas increase, and the hydraulic system used in Switzerland, requires quality control of hydraulic oil and temperature control during work. And the extension of life is resitricted by the dust generated by the work. SBKJ took this into account to avoid the above situation.

Advantages of 2: Mold can be changed to produce various spiral duct. This item has been applying for invention patents, which other similar products can not be done.

Advantages of 3: While the price of the purchase of equipment like sprial tubeformer is not most important to customers, but a small amount of money spent to purchase more advanced equipment is always good.

From:http://www.sbkj.com/news/index.html

Spiral duct is mainly used for air duct,and it has several obvious advantages against previous rectangular duct:
First,it can increase the strength, because every bite there is strengthening rib.
Second,High efficiency, feed speed of 38 meters per minute is impossible for rectangular duct production;
Third,Reduce consumption and save energy:It is of vortex shape when the air pass from the duct,using the sprial duct can reduce resistance.Morever,cleaning is very convenient because there are professional cleaning tools and no dirt corners on the inner wall of the sprial tube with outside corrugations and outside lock seam.
So it can not only save material, to be very economical, but also can improve the air flow.

There are two distinguishing  products of SBKJ:
One is flying shear type sprial tubeformer,model:SBTF- 1602 tube machine.What are the advantages of it?
First,as use of the stable forming dies,there is no size bias in the operation.The other advantage is that there are hardly scratches on the surface, so the it can satisfy the high requirements of places like airport and clean room.
Another product SBTF-1500D  tube former with a big technology breakthrough.It increases a roll-type cutting shear on the basis of our previous product SBTF-1500 pipe machinery.The advantage is:
no need of forming dies
can produce pipe between diameter 80mm and 1500mm with the change of one metal band
the breakthrough is the roll-type cutting shear,no noise and no scratche 

From:http://sbkj.com/news/index.html

SBKJ will participate in EASTPO 2009. Welcome all friends coming to our booth.

Hall: A905
Stand: E4
Date:July 15-18, 2009
Main products:tubeformer,spiral tube making machine ,duct machine ,spiral duct machine,elbow machine ,cnc plasma,pipe machinery........
 
Eleventh Shanghai International Machine Tool Show will be held July 15-18, 2009 at the Shanghai New International Expo Center soon.East China with the center of Shanghai, is China's most developed manufacturing sector with high economic growing.
With Shanghai as the leader of the Yangtze River Delta economic zone, has to occupy one-third of the national machine tool market.

By then, the exhibition area will be expanded from 70,000 to 100,000 square meters, accounting for 8 Pavilion.There will be 10 million professional audience,mainly from the automotive components, machining, mold manufacturing, shaping machinery,machine tool, defense, aviation and space,general machinery, shipbuilding,metal products industry and so on.

Theme of the exhibition this time is "common achievements, and win-win future."

From:http://sbkj.com/news/index.html

Jiangyin Sanben Technology Co., Ltd. is a new high-tech enterprise approved by the Jiangyin Technical Association, and is a member of the China Cold Curved Steel Section Association. The company is located in the Yangtze River Delta, nearby to the regional trade center of Shanghai.

The company mainly manufactures cold curved shaping machinery such as: flat duct oval machine, duct forming machine, tube forming machine, plasma cutters...The employees are experienced senior technicians and overseas returned COPRA students from Switzerland and Germany. They also have many years experience in close cooperation with many famous domestic universities  such as the Central China University of Science and Technology.

With the support of  the departments of  high technology, R&D, and  administration in the universities, as well as advanced marketing ideas and service system, they can supply high quality services and products to domestic and international enterprises.

By cooperating with famous Swiss enterprises, they master the most advanced technology of making spiral tubeformer of central air conditioner  and high-accuracy production line in the domestic market.

Guided by the enterprise spirit of "sincerity oriented", using CAD / CAM software and electromechanic technology, the company is engaged in the development of new products, new techniques and new technology. They aim to satisfy every customer by offering quality products, reasonable price, prompt delivery tome and excellent services.